Hcopy:size:x; Hcopy:size:y; Log[:State]; Log:count - R&S NGM202 User Manual

®
R&S NGL200/NGM200

HCOPy:SIZE:X?

Returns the horizontal dimension of the screenshots.
Usage:

HCOPy:SIZE:Y?

Returns the vertical dimension of the screenshots.
Usage:
LOG[:STATe] <state>

LOG[:STATe]?

Sets or queries the data logging state.
Parameters:
<state>
Example:
LOG:COUNt <count>
LOG:COUNt? [<count>]
Sets, queries the number of measurement values to be captured.
Setting parameters:
<count>
Query parameters:
<count>
User Manual 1178.8736.02 ─ 06
Query only
Query only
OFF | ON | 0 | 1
ON | 1
Data logging function is enabled.
OFF | 0
Data logging function is disabled.
*RST: OFF | 0
LOG ON
LOG? -> 1
Data logging function is activated.
numeric_value | MIN | MAX
numeric_value
Number of measurement values to be captured is set in the
range of 1 to 10000000.
MIN
Minimum number of measurement values to be captured is set
at 1.
MAX
Maximum number of measurement values to be captured is set
at 10000000.
MIN | MAX
Returns the number of measurement values.
Remote Control Commands
Data and File Management Commands
149