Log:duration; Log:fname; Log:interval - R&S NGM202 User Manual

®
R&S NGL200/NGM200
Example:
LOG:DURation <span>
LOG:DURation? [<span>]
Sets or queries the duration of the data logging.
Setting parameters:
<span>
Query parameters:
<span>
Example:

LOG:FNAMe?

Queries the filename and storage location for the data logging.
Example:
Usage:
LOG:INTerval <interval>
LOG:INTerval? [<interval>]
Sets or queries the data logging measurement interval. The measurement interval
describes the time between the recorded measurements.
Setting parameters:
<interval>
User Manual 1178.8736.02 ─ 06
LOG:COUN MAX
LOG:COUN? MAX -> 10000000
numeric_values | MIN | MAX
numeric_values
Duration of the data logging captured in the range of 0 s to
3.49*10^5 s.
MIN
Minimum duration of the data logging captured at 0 s.
MAX
Maximum duration of the data logging captured at 3.49*10^5 s.
Default unit: s
MIN | MAX
Returns the duration of the data logging.
LOG:DUR MAX
LOG:DUR? MAX -> 349000
LOG 0
LOG:FNAM? -> ""
LOG 1
LOG:FNAM? -> "/int/logging/log-20190318T1141853.407.csv"
Enables the data logging and queries the data log filename.
Query only
numeric_value | MIN | MAX
numeric_value
Measurement interval in the range of 0.1 s to 600 s.
Remote Control Commands
Data and File Management Commands
150