Battery:model:fname; Battery:model:isoc - R&S NGM202 User Manual

®
R&S NGL200/NGM200
Parameters:
<arg0>
<arg1>
<arg2>
Example:
Sets the battery model data.
BATTery:MODel:FNAMe <Filename>[,<Partition>]
BATTery:MODel:FNAMe? <Filename>[,<Partition>]
Sets or queries a filename for the battery model.
Parameters for setting and query:
<Filename>
<Partition>
Example:
BATTery:MODel:ISOC <State_of_charge>
Sets or queries the initial state of charge (SoC) of the battery model.
Parameters:
<State_of_charge>
Example:
BATTery:MODel:LOAD <filename>
Loads a battery model for editing.
Example:
Usage:
User Manual 1178.8736.02 ─ 06
Sets the value for battery state of charge (SoC).
Sets the value for battery open-circuit voltage (Voc).
Sets the value for battery internal resistance (ESR).
BATT:MOD:DATA 0,0.0,2.0,100,5.0,2.0
Filename for the battery model.
INT | EXT | DEF
Selects partition for file storage.
INT
Internal memory used for file storage
EXT
USB stick used for file storage
DEF
If USB stick is used, default storage partition is set to EXT.
BATT:MOD:FNAM "NEwBattery.csv",INT
Sets the battery model filename to "NewBattery.csv" (internal
memory).
Initial state of charge (SoC) for the battery model.
INST:NSEL 1
BATT:MOD:ISOC 50
Initial state of charge is set to 50 % for channel 1.
BATT:MOD:LOAD
Loads the current battery model to a file.
Event
Remote Control Commands
Advanced Operating Commands
142