R&S NGM202 User Manual page 66

®
R&S NGL200/NGM200
4. Activates the "Enabled" menu item.
The R&S NGL/NGM enables the Arbitrary function and displays the "Arbitrary" icon
on the selected channel status bar information.
5. Select "Load from file.." to load the arbitrary file.
6. Select the required source and file location.
Alternatively, select "New file" to edit a new arbitrary file. The R&S NGL/NGM
opens the
7. Select "Load" to load the selected file.
The R&S NGL/NGM loads the selected arbitrary file.
8. Applicable only with R&S NGL-K103 or R&S NGM-K103, Digital Output option.
See
Activate "Start triggered" or "Step triggered" if the arbitrary function is executed
under triggered condition.
●
●
Arbitrary editor
Interpolation flag
After execution of all repetition cycles, the last interpolation flag is ignored. See
ure 6-22.
The "Arb Editor" dialog allows you to edit the arbitrary profile ("Voltage", "Current",
"Time", "Interpolate" status, "Rep." and "End Behavior"). To view or open the list of
available arbitrary files, select
User Manual 1178.8736.02 ─ 06
arbitrary editor dialog
Chapter 6.6, "Trigger / Digital
"Start triggered": If triggered, the complete arbitrary function is executed.
"Step triggered": If triggered, every arbitrary step needs a trigger signal to exe-
cute (step time from "Arb Editor" is ignored).
to edit the arbitrary file.
I/O", on page 57.
to open the arbitrary file.
Instrument Functions
Advanced Features
Fig-
63