Power Supply - TANDBERG Alteia Instruction Manual

Technical Specification
B.6

Power Supply

This equipment is fitted with an auto-ranging power supply. It is suitable
for supply voltages of 100-120 Vac -10% +6% or 220-240 Vac -10% +6%
at 50/60 Hz nominal.
Table B.39: Power Supply Specifications
Item
Power distribution system
Connection to supply
Class of equipment
Rated voltage
Rated frequency
Voltage selection
Rated current (max)
Input connector
Fuse rated voltage
Fuse type
Consumption
Power cable connector fuse
Page B-20
Specification
Type TN ONLY (EN 60950 para 1.2.12.1): Power distribution system having one point
directly earthed, the exposed conductive parts of the installation being connected to
that point by protective earth conductors. This equipment must NOT be used with
single-phase three-wire and PE, TT or IT Type Power distribution systems.
Pluggable Equipment Type A (EN 60950 para 1.2.5): Equipment that is intended for
connection to the building power supply wiring via a non-industrial plug and
socket-outlet or a non-industrial appliance coupler or both. Correct mains polarity
must always be observed. Do not use reversible plugs with this equipment.
Class I Equipment (EN 60950 para 1.2.4): electric shock protection by basic
insulation and protective earth.
100 – 120 / 220 – 240 Vac
50 - 60 Hz
Auto-ranging
1.0 A
CEE 22/IEC 320 3-pin male receptacle
250 Vac
T1.6A, H250 V, 5x20mm, IEC 127-1 and UL recognised.
75 W nominal
5 A
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8