Ptr Terrestrial Receiver - TANDBERG Alteia Instruction Manual

PTR Terrestrial Receiver

RF Input
Table 2.9 applies to models M2/PTR/942 and M2/PTR/948[A]
A BNC socket provides a connection for the UHF
output of a suitable aerial to the RF INPUT connector.
This model has a 20 dB attenuator fitted to the input
of the tuner. It should be removed if greater
sensitivity is required.
This input is activated through the Terrestrial Receiver
Input menu #4. The specification for this connector is
given in Table B.19.
Table 2.9: RF Input Connector (PTR Terrestrial Receiver)
Item
Connector type
Connector designation
Pin:
Impedance
Baseband Input
A single-ended, 75 W BNC socket on the M2/PTR/942
and M2/PTR/948[A] models, provides a baseband
input of 7.612 MHz bandwidth with a centre frequency
of 4.571 MHz. The specification for this connector is
given in Table B.21.
Table 2.10: Baseband Input Connector (Terrestrial Receiver)
Item
Connector type
Connector designation
Pin:
Impedance
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Specification
BNC Female
RF INPUT
Centre RF Input
Shield Ground/Chassis
50 W (nominal)
Specification
BNC Female
BASEBAND INPUT
Centre RF Input
Shield Ground/Chassis
50 W (nominal)
Installing the Equipment
RF INPUT
BASEBAND INPUT
Page 2-15