TANDBERG Alteia Instruction Manual page 163

C.17 Engineering Menu (#14)
The pages in this menu display low-level system status information. It is
accessed by pressing the RIGHT button whilst rotating the MENU control.
Table C.37: Engineering Menu (#14) Pages
Page Display
1 #14 ENGINEERING
SERVICE ID
2 #14 ENGINEERING
TRANSPORT STREAM ID
3 #14 ENGINEERING
ORIGINAL NETWORK ID
4 #14 ENGINEERING
NETWORK ID
5 #14 ENGINEERING
editable VIDEO PID
6 #14 ENGINEERING
editable AUDIO1 PID
7 #14 ENGINEERING
editable AUDIO2 PID
8 #14 ENGINEERING
editable PCR PID
9 #14 ENGINEERING
editable ASYNC DATA PID
10 #14 ENGINEERING 310/124
editable SYNC DATA PID
11 #14 ENGINEERING 311/12Ø
TELETEXT DATA
NOT SUPPORTED
12 #14 ENGINEERING
EMM PID
NOT SUPPORTED
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Description
1/124 Current Service setting.
32/124 Current Service setting.
33/124 Current Service setting.
34/124
Current Service setting.
35/124
The PID is reset by reselecting the Service from the Service Menu (#3).
36/124
The PID is reset by reselecting the Service from the Service Menu (#3).
37/124 The PID is reset by reselecting the Service from the Service Menu (#3).
38/124 Current Service setting.
39/124 The PID is reset by reselecting the Service from the Service Menu (#3).
The PID is reset by reselecting the Service from the Service Menu (#3). Supported
by models having the suffixes A or B (e.g. M2/PSR/942B).
Current Service setting. (Not supported at ver 2.3; Version 2.32 supports Teletext).
312/12
Current Service setting. (Not supported at ver 2.3.)
Menus
Page C-39