TANDBERG Alteia Instruction Manual page 161

C.16.2 Using the SMALL RBUFF MODE (Menu #13, Page 22)
When to Disable the SMALL RBUFF MODE
Disable the SMALL RBUFF MODE when the transport stream has been
encoded by any of the following families of TANDBERG Television
Encoders:
·
System 3000 M2/ENC/E5xx0
·
evolution 5000 M2/ENC/E5xx1
Disabling the buffer is the factory default.
When to Enable the SMALL RBUFF MODE
Enable the SMALL RBUFF MODE when the transport stream has been
encoded by any of the following families of TANDBERG Television
Encoders
·
System 3000 Mobile Contribution Encoders M2/ENC/E54xx and
M2/ENC/E5500
·
System 3000 12U and 6U Encoders M2/EDS[3]/...
If trouble is encountered when decoding a non-TANDBERG 4:2:2
transmission, enabling the Small Rate Buffer may resolve the problem.
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Menus
Page C-37