Selecting The Audio Component; Introduction; Audio Selection - Manual - TANDBERG Alteia Instruction Manual

Professional receivers and decoders
Table of Contents

Advertisement

3.4.3

Selecting the Audio Component

Introduction

There are two methods of selecting the audio components to be decoded
by the Alteia. These are:
·
Automatic selection using defaults
·
Manual or remote selection for each individual service
The Alteia has two independent audio decoders. Each decoder can output a
stereo pair or two mono-audio channels. Each decoder uses the language
descriptor within the Service Information (SI) to select the required audio
component. Therefore, all audio components must have a different
language descriptor name. If the language for a number of components is
the same, it is possible to manually select the required one. However,
automatic selection will only choose the first instance of that name.
Audio Languages:
ENGLISH
DUTCH
FRENCH
GERMAN
SWEDISH
GREEK
Figure 3.2: Automatic Selection of Languages

Audio Selection - Manual

It is possible to select any audio component from the active service by
using the front panel controls or via the remote control interface.
Table 3.11 describes the procedure for selecting a component using a
Satellite Receiver. Other units act in a similar manner.
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
TANDBERG
Up-converter
and HPA
Operating the Equipment Locally
Default Languages
Audio 1: ENGLISH
ALTEIA
Audio 2: FRENCH
ALARM
REMOTE CNTRL
AUTHORIZED
BER STATUS
LOCK
MULTIFUNCTIONAL DISPLAY
Default Languages
Audio 1: DUTCH
ALTEIA
Audio 2: FRENCH
ALARM
REMOTE CNTRL
AUTHORIZED
BER STATUS
LOCK
MULTIFUNCTIONAL DISPLAY
Default Languages
Audio 1: ENGLISH
Audio 2: DUTCH
ALTEIA
ALARM
REMOTE CNTRL
AUTHORIZED
BER STATUS
LOCK
MULTIFUNCTIONAL DISPLAY
Default Languages
Audio 1: GERMAN
ALTEIA
Audio 2: SWEDISH
ALARM
REMOTE CNTRL
AUTHORIZED
BER STATUS
LOCK
MULTIFUNCTIONAL DISPLAY
Default Languages
Audio 1: GREEK
ALTEIA
Audio 2: ENGLISH
ALARM
REMOTE CNTRL
AUTHORIZED
BER STATUS
LOCK
MULTIFUNCTIONAL DISPLAY
Default Languages
Audio 1: GERMAN
Audio 2: FRENCH
ALTEIA
ALARM
REMOTE CNTRL
AUTHORIZED
BER STATUS
LOCK
MULTIFUNCTIONAL DISPLAY
Page 3-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alteia plus

Table of Contents