Menu #7 (Software Version 2.4 And Later - TANDBERG Alteia Instruction Manual

C.10.2 Menu #7 (Software Version 2.4 and Later)
This group of menus sets the Subtitle default language, enables/disables
Vertical Interval Test Signals (VITS) and enables/disables various types of
Vertical Blanking Interval (VBI) data.
Menu pages 3, 6, 9 and 10 are displayed in Alteia as pages 1 to 4, of 4.
Pages 1 through 10 are all displayed by Alteia plus as shown in Table C.18.
Table C.18: Subtitle/VBI Menu (#7) Pages (Software Version 2.4 and later)
Page Display
1 #7 SUBTITLE/VBI
selectable LINE INPUT
21 WSS
Purchasable
option.
2 #7 SUBTITLE/VBI 32/104
selectable TELETEXT
ENABLED
Purchasable
option.
3 #7 SUBTITLE/VBI 33/104
selectable VITS INSERTION
ENABLED CCIR
4 #7 SUBTITLE/VBI 34/104
selectable VITC INSERTION
ENABLED
Purchasable
option.
5 #7 SUBTITLE/VBI 35/104
selectable GCR INSERTION
ENABLED
Purchasable
option.
6 #7 SUBTITLE/VBI 36/104
selectable CC / VCHIP
ENABLED
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Description
1/104 This menu displays the current
OUTPUT reinsertion data available for the
TTXT selected line and the data type
being inserted by the unit.
The INPUT field only includes
reinsertion data received over-air,
not Teletext or VBI test signals.
The OUTPUT field shows data
inserted by the unit based on the
user's selections – Teletext data
and test signals take priority over
reinsertion signals.
This menu controls the insertion of
all Teletext lines. Should any
conflicts occur, these signals take
priority over reinsertion signals.
Enable/disable the insertion of
VITS test signals.
Enable/disable the insertion of the
VITC signal. The signal appears on
two non-adjacent lines per field.
Enable/disable the Ghost
Cancellation Reference. This only
appears on the SDI output NOT
the analogue output.
Enable/disable the presence of
Closed Caption / VCHIP data to be
monitored and to enable or disable
its reinsertion into the VBI.
Refer to Chapter 6, Preventive
Maintenance and Fault-finding for
setting information.
Options
The selected LINE can be 11 to 23.
INPUT: VPS (Video Programming System)
CCVC (Closed Caption /VCHIP)
WSS (Wide Screen Signalling)
AMOL (Automatic Measure of Lineups)
VIDX (Video Index)
NONE (not available or line disabled)
OUTPUT: TTXT (EBU Teletext data)
ITS (Insertion test signals)
GCR (Ghost cancelling reference)
VITC (Vertical interval time code)
NONE
625 standard: Line 1:
TELETEXT
Teletext lines may be
placed on any or all of Line 2:
lines 7 – 22 and 320 – ENABLED
335. DISABLED
525 (FCC) standard: DISABLED
Lines 17/280 ENABLED CCIR [ITU-R]
625 (UK) standard: ENABLED FCC/UK
Lines 19/20/332/333 NOT SUPPORTED
625 (ITU-R):
Lines 17/18/329/330
525 (SMPTE) DISABLED
standard: ENABLED
Lines 14 and 16 NOT SUPPORTED
625 (UK) standard:
Lines 19 and 21
525 standard: DISABLED
Line 19 ENABLED
625 standard: NOT SUPPORTED
Line 318
525 standard: Line 1:
Line 21 CC / VCHIP
Line 2:
ENABLED
DISABLED
NOT SUPPORTED
Menus
Page C-25