TANDBERG Alteia Instruction Manual page 42

Installing the Equipment
DVB-SPI Transport Stream In
This connector on the models
M2/PDU/942[B][C][D], provides a
DVB-SPI parallel input. For DVB parallel
working, connect the input Transport
Stream to the appropriate transport
input connector.
This input is activated through the Decoder Input menu #4. The
specification for this connector is given in Table B.11.
Table 2.6: DVB-SPI Parallel Input Connector
Item
Connector Type
Connector Designation
Pin-outs:
Page 2-12
Specification
25-way, D-type female
DVB SPI
Pin 1 ¾ BYTE_CLOCK (+)
Pin 2 ¾ 0V
Pin 3 ¾ DATA_7 (+)
Pin 4 ¾ DATA_6 (+)
Pin 5 ¾ DATA_5 (+)
Pin 6 ¾ DATA_4 (+)
Pin 7 ¾ DATA_3 (+)
Pin 8 ¾ DATA_2 (+)
Pin 9 ¾ DATA_1 (+)
Pin 10 ¾ DATA_0 (+)
Pin 11 ¾ DVALID (+)
Pin 12 ¾ PKT_SYNC (+)
Pin 13 ¾ PROT GND
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
13
25
Pin 14 ¾ BYTE_CLOCK (-)
Pin 15 ¾ 0V
Pin 16 ¾ DATA_7 (-)
Pin 17 ¾ DATA_6 (-)
Pin 18 ¾ DATA_5 (-)
Pin 19 ¾ DATA_4 (-)
Pin 20 ¾ DATA_3 (-)
Pin 21 ¾ DATA_2 (-)
Pin 22 ¾ DATA_1 (-)
Pin 23 ¾ DATA_0 (-)
Pin 24 ¾ DVALID (-)
Pin 25 ¾ PKT_SYNC (-)
1
14
ST.TM.E9200.8