Digital Video; Video Test (Monitor) Connector; Audio Outputs; Analogue Audio - TANDBERG Alteia Instruction Manual

Technical Specification

Digital Video

Table B.26 applies to all M2/Pxx/94x Models.
Table B.26: Digital Video Output Connector
Item
Safety status
Connector type
Video standards
Video level
Jitter Performance, Nominal
(Tested according to SMPTE RP184 100%
Colour Bars)

Video Test (Monitor) Connector

Table B.27: Video Test (Monitor) Connector
Item
Safety status
Connector type
Composite video level
NOTE...
Video performance characteristics are different to those measured at the rear panel connectors.
B.4.3

Audio Outputs

Analogue Audio

Four XLR audio connectors are provided for two stereo or dual-channel
audio outputs.
Table B.28: Analogue Audio Output Connector
Item
Safety status
Output level
Nominal output impedance
Load impedance
Clipping level dBm
Output level
Compression layers
Sampling rates
Data rates
Page B-16
Specification
SELV
BNC, female, 75 W.
ITU-R BT.656 digital output at 270 MHz
800 mV ± 10mV pk-pk in 75 W nominal
PXX / 942
PXX / 942/A 0.3 UI
PXX / 942/B 0.2 – 0.26 UI locked to PCR
/ '
PXX / 942/C 0.2 – 0.26 UI
Specification (See notes on Page B-15)
SELV
BNC, female, 75 W
1V pk-pk into 75 W nominal
Specification
SELV
0 dBm nominal
50 W
³600 W balanced
0 to +18 (set via on-screen menus)
±3 dBm from the clipping level
MPEG-2 layers 1 and 2, Dolby Digital (AC-3)
32, 44×1, 48 kHz
All MPEG-2 rates
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
/ 0.7 UI
0.7 UI Frame Synchronised
42
ST.TM.E9200.8