A.c. Power Supply Cord; General; Wire Colours - TANDBERG TT1260 Reference Manual

A.C. Power Inlet
Fuse Carrier
Figure 2.2: A.C. Power Inlet Assembly
Table 2.1: Fuse Information
Item
Fuse
Fuse type
Fuse rating
Fuse rated voltage
Power lead connector fuse (if appropriate)
NOTE...
See Annex B, Technical Specification for more fuse information.
2.5.1

A.C. Power Supply Cord

General

A two-metre mains supply cord is supplied with this product. It is fitted with a moulded plug
suitable for the USA, UK or mainland Europe as advised at the time of ordering.

Wire Colours

The wires in the supply cord are coloured as shown in Table 2.2.
Table 2.2: Supply Cord Wiring Colours
Earth:
Neutral:
Live:
If the colours do not correspond with the coloured markings identifying the terminals in a
locally supplied plug, proceed as in
Reference Guide: TT1260 Contribution ReceiverTT1260 Contribution Receiver
ST.RE.E10100.3
Specification
Single pole, fitted in live conductor in power input filter at rear of unit.
5 mm x 20 mm anti-surge (T) HBC, IEC/EN 60127-2 Sheet 5
3.15 A
250 Vac
5 A
UK (BS 1363)
Green-and-yellow
Blue
Brown
To access the fuse, ease out the notch
with a small flat-blade screwdriver.
EUROPE (CEE 7/7)
Green-and-yellow
Blue
Brown
Installing the Equipment
USA (NEMA 5-15P)
Green
White
Black
Page 2-7