TANDBERG Alteia Instruction Manual page 3

List of Contents
Chapter 1: Introduction
This chapter identifies the equipment versions covered by this manual;
describes the purpose of the equipment in a typical system; provides a
summary of its main features; identifies the controls, indicators and
connectors in a guided tour of the front and rear panels; and lists the
available options.
Chapter 2: Installing the Equipment
This chapter provides a guide to the suitability of an installation; gives
detailed procedures for the preparation, installation and configuration of
the equipment including important safety information; provides pin-out
details of the the external connectors; and details the power-up/-down
procedures.
Chapter 3: Operating the Equipment Locally
This chapter provides a guide to using the LCD interface and details the
setting-up, configuration and operating procedures.
Chapter 4: Alarms
This chapter provides a guide to configuring the alarm interface.
Chapter 5: Options
This chapter describes the options available for the Alteia and Alteia plus.
It also describes the range of associated Conditional Access modules.
Chapter 6: Preventive Maintenance and Fault-finding
This chapter details routine maintenance tasks to be performed; provides
general servicing advice, and information regarding warranty and
maintenance; lists the error messages that may occur, and any
appropriate Operator action to be taken; provides general fault-finding
information for other types of problem which may be encountered.
Annex A: Glossary
Annex B: Technical Specification
Annex C: Menus
Annex D: Using the Alteia [plus] with the Director System
Annex E: Language Abbreviations
Annex F: Factory Defaults
Annex G: Quick Reference Guide
Index
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Preliminary Pages
Page iii