TANDBERG Alteia Instruction Manual page 82

Options
DVB ASI Optical Connector
NOTE...
The Class 1 LASER warning is as defined in paragraph 5.2 of EN 60825-1 1994.
Provides an optical fibre connector for the DVB
Asynchronous Serial Interface (ASI). This
output is continuously active when fitted.
Table 5.2: DVB ASI Optical Output
Item
Safety status
Connector type
Connector designation
Fibre optic cable type
Maximum cable attenuation
Maximum output cable length
Maximum data rate
Transmission format
5.2 Options (Purchasable)
There are a number of options that can be purchased separately. Some of
these are model dependent. Table 5.3 lists the options.
Table 5.3: Options (Purchasable)
Description
ASI Output Module
BISS
Dolby Digital (AC-3) Audio
Frame Synchroniser option
RAS I and II
Linear Audio (SMPTE 302M-1998)
Linear Audio (SMPTE 302M-2000)
VBI reinsertion
NOTES...
1. A software upgrade to v2.8 would require the installation of Linear Audio (SMPTE 302M-2000).
2. M2/PTRE/948CVL comprises M2/PTRE/948C plus M2/PRO/LINA.
Page 5-4
LASER: CLASS I LASER PRODUCT
DO NOT LOOK INTO THE APERTURE.
LOOKING INTO THE APERTURE COULD CAUSE DISCOMFORT TO YOUR EYE.
Specification
CLASS 1 LED PRODUCT as defined in EN 60825-1
SC type
TSO ASI (FIBER)
Multimode 62.5/125 mm
1.5 dB/km @ 1300 nm
£2.66 km
270 Mbit/s
See para 5.1.1
Option Type Marketing Code
Internal card
Software
Software
Software
Software
Software
Software
Software
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
WARNING...
M2/PRO/ASI
M2/PRO/BISS
M2/PRO/DAC3
M2/PRO/SYNC
M2/PRO/RAS
M2/PRO/LINA
M2/PRO/LINA
M2/PRO/AVBI
Availability (S/W version)
all versions
2.8 and later
2.2 and later
2.4 and later
2.1.1 and later
2.4 to 2.5.5
2.8 and later
2.4 and later
ST.TM.E9200.8