Setting Up The Power-Up Default Preset Service - TANDBERG Alteia Instruction Manual

Setting up the Power-up Default Preset Service

Follow the steps in Table 3.17 to select the preset Service that will be
presented on power-up.
nn is the storage slot.
Figure 3.4: Setting Up the Power-up Default
The LAST VALID SERVICE can be chosen instead to allow the Alteia to
power up to the Service that was in use at power-down.
Table 3.17: Setting up the Default Preset Service
Step
1.
2.
3.
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
MENU
#2 PRESET
DEFAULT
nn [service name]
MULTIFUNCTION DISPLAY
EDIT SAVE
Press SAVE to confirm the Default selection.
Press EDIT in conjunction with rotating the
SELECT control to access a storage slot.
Action
Display page 3 of the Preset menu (#2).
Select the required preset Service as
the default on power-up.
Press SAVE.
Operating the Equipment Locally
service name is the stored service preset.
SELECT
3/4â
LEFT RIGHT
Result
This is the menu that allows the default preset Service to be
selected.
Use EDIT and SELECT to step through the stored presets.
Alternatively, choose LAST VALID SERVICE to automatically
reselect the Service in use at power-down.
This stores the selected preset Service and its associated
parameters as the default Service to be presented on power-up.
Press EDIT in
conjunction with rotating
the SELECT control to
access a storage slot.
Page 3-17