Preset (Services) Menu (#2 - TANDBERG Alteia Instruction Manual

Table C.3: Director Status Menu (#1) Pages
Page Display
6 #1 STATUS MESSAGE
THIS IS A 40 CHARACTER
DIRECTOR MESSAGE
C.5

Preset (Services) Menu (#2)

This group allows up to 20 (00 to 19) services to be stored as presets.
Selecting a Service via the Preset menu automatically reconfigures the
Alteia. It also allows the power-up default (Menu #2, page 3) to be set.
Where a choice exists, each preset can have a selected language, network
name and service provider associated with it.
NOTES...
1. A preset can only be stored if the service is currently being decoded.
2. Preset "– " is below entry "00" in the list.
Table C.4: Preset Menu (#2) Pages
Page Display
1 #2 PRESET
selectable SELECT
18 [service name]
2 #2 PRESET
selectable STORE [service name] IN
17 [EMPTY]
3 #2 PRESET
selectable DEFAULT
21 [service name]
4 #2 PRESET
selectable CLEAR
17 [service name]
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Description
36/6 The last page contains the last received non-editable message
from the current service provider. If the unit is in Remote control,
there is an indication that a new message is available.
Description
1/44 Provides a list of stored presets. Press EDIT and use SELECT to scroll through the list, and
SAVE to select a service.
·
If a service is stored, the preset number and the Service Name are displayed.
·
If the current Service is not a preset, the preset number is set to - - and the current Service
Name is displayed.
·
If a preset does not contain a stored service, the service name displays EMPTY.
·
If no service is being decoded, the preset number is not shown and the service name
displays NO SERVICE RUNNING.
·
If there is no input lock, the preset number is not shown and the service name displays
INPUT NOT LOCKED.
·
If the input is locked but there is no SI, the preset number is not shown and the service
name displays NO SERVICE INFO.
·
If the incoming transport stream is MPEG-2-only, the service number is shown in the format
SERVICE ID nnnn
32/44 This page allows the currently active Service [service name] and associated parameters to be
stored as a preset (the service name is truncated to 15 characters). Press EDIT and use
LEFT/RIGHT/SELECT to select the preset number, and SAVE to store the service.
·
If no service is stored, the service name displays EMPTY.
·
If no service is being decoded, the service name displays NOTHING TO STORE.
33/44 Specifies the default power-up service. Empty presets are not selectable in EDIT mode.
·
If no service is stored, the service name displays EMPTY.
·
If LAST VALID SVC (factory default) is selected, the unit powers up to the Service being
decoded at power-down.
34/4 Used to clear filled presets. Scroll through the list, stopping at the Service to be terminated as a
preset. Press SAVE while the cursor is still within the Service name or associated number. Press
SAVE button to CONFIRM. Rotate the MENU or SELECT control to abort the process.
·
If no presets, the service name displays SLOTS ALL CLEARED.
Menus
Restrictions
Over-air control
(Director) models
only
Page C-9