Status Menu (#1; Status Menu Configuration - TANDBERG Alteia Instruction Manual

Professional receivers and decoders
Table of Contents

Advertisement

Menus
C.4

Status Menu (#1)

C.4.1
Status Menu Pages
This is the primary menu group for the Alteia. Any five of the Alteia's menu
pages can be displayed in any order as required. Alteia reverts to Menu #1
page 1 when the front panel controls have not been used for
approximately three minutes.
The factory defaults are that page 1 displays the current service and the
other pages are blank.
Table C.1: Status Menu (#1) Pages
Page
Display
1
#1 STATUS
selectable
SERVICE
MOVIES ONE
n
#1 STATUS
selectable
[BLANK]
5
#1 STATUS
selectable
[BLANK]
Each of the five pages can be can be configured to display any Menu page.
C.4.2

Status Menu Configuration

Pressing the EDIT button and using the SELECT control allows access to all
the displayable Menu items.
Table C.2: Menu (#1) Configuration Pages
Page
Display
selectable
#1 STATUS – TIMERS 1/64
TIME ZONE
081 GMT+0000
C.4.3
Director Status Message Page
If the unit is under Over-air control, a further page is added to the Status
Menu (shown overleaf in Table C.3). This page gives a maximum of 6
pages to Menu #1 and displays the last received Director message.
In over-air mode, the page is automatically displayed when a new
information message is received. It remains until either the message is
cancelled, or a new menu or page is displayed locally.
When cancelled, the Menu display reverts to Page 1.
Page C-8
Description
1/54
Factory default: this page displays the current service. However, it can be reconfigured to
display any menu page.
3n/54
Factory default: pages 2 to 5 are blank. They can be configured to display any menu page.
35/5
Description
This is an example of a page displayed (when in page 1 of Menu #1) after pressing the EDIT
button and rotating the SELECT control to scroll through the complete set of menu pages.
The viewed menu is shown between STATUS and 1/6 (e.g. TIMERS).
The number in the lower left hand corner is the page reference while in this mode
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alteia plus

Table of Contents