Authorised Led Indications And Alarms (Ca); Summary Alarm - TANDBERG Alteia Instruction Manual

Alarms
4.1.3

Authorised LED Indications and Alarms (CA)

Table 4.1: Authorised LED
Model
All models
All models
Models with RAS
enabled
Models with BISS
enabled
Models with
VideoGuard enabled
4.1.4

Summary Alarm

The front panel summary ALARM LED provides a high-level indication of an
alarm within the unit. The alarm list depends on the Alteia model. The
alarm lights under the following conditions (if not masked – see Annex C,
Menus, Menu #5):
·
No valid input signal
·
Signal level too low
·
The input frequency is out of range
·
The received Service is not authorised
·
The Smart-Card is not readable
·
The LNB supply trips
·
The tuner/demodulator is not locked
Page 4-4
Legend Displayed on AUTHORIZED
Menu #10, Page 1 LED Status
NO SERVICE SELECTED OFF
CLEAR OFF
RAS2 AUTHORISED Green
RAS1 Green (Blinking)
RAS2 UNAUTHORISED Red
BISS AUTHORISED Green (Blinking)
BISS UNAUTHORISED Red
VGUARD AUTHORIZED Green
VGUARD Red
UNAUTHORIZED
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
Description
A stream transmitted clear has been detected.
A stream scrambled with RAS2 has been detected
and the unit is authorised to decrypt it.
A stream scrambled with RAS1 has been detected.
A stream scrambled with RAS has been detected
and the unit is not authorised to decrypt it.
A stream scrambled with BISS Mode 1, 2 or 3 has
been detected and the unit is authorised to decrypt it.
A stream scrambled with BISS Mode 1 has been
detected but the unit is in BISS Disabled mode.
A stream scrambled with Videoguard conditional
access has been detected and the unit is authorised
to decrypt it.
A stream scrambled with Videoguard conditional
access has been detected and the unit is not
authorised to decrypt it.
ST.TM.E9200.8