TANDBERG Alteia Instruction Manual page 177

G.2.2 Setting Up the Power-up Service
Menu #2 allows a Service to be chosen as the Power-up default. Follow
the steps in Table G.5.
Table G.5: Selecting a Power-up Service
Step Action (Menu #2)
1. Go to Menu #2, page 3 and select the required Service
(or last valid service).
This sets the service to which the Alteia will configure on power-up.
2. Press SAVE.
This stores the service as the power-up service.
G.2.3 Setting up a Pre-set Service
Follow the steps in
Table G.6: Setting up a Pre-set Service
Step Action (Menu #2)
1.
2.
3.
4.
5.
G.2.4 Selecting the Default Audio Language
Page 3 of Menus #8 and #9 allows the audio channels default language to
be specified. The Alteia uses the default languages, if it can't find these,
then them first language specified in the PMT is used on Audio 1 and the
second on Audio 2. Menu #3, Pages 2 and 3 can be used to override the
default.
Table G.7: Selecting the Default Audio Language
Step Action (Menu #8, #9)
1. Go to Menu #8 or #9, page 3 as required.
This displays the current default language.
2. Select the required audio language(s).
Use EDIT, SELECT and SAVE to select the required language.
3. Press SAVE to store the choice.
The language profile is now set.
Instruction Manual: Alteia and Alteia plus Professional Receivers and Decoders
ST.TM.E9200.8
Table G.6
Use the menus to set up the unit so that the required Service is current.
This selects the Service and associated parameters for the pre-set process
Display page 2 of the pre-set menu (#2).
(The Service Name in this display is truncated to 11 characters)
This displays the menu which allows the Current Service to be stored at a chosen location (00 - 19). If there is no
Current Service, the menu display reads NOTHING TO STORE.
Select a location to store the pre-set.
The EDIT mode cannot be entered unless a valid Service being decoded.
Use EDIT and SELECT to step through the stored items. This allows a specific location to be chosen. Any vacant
locations are marked by the legend [EMPTY].
Press SAVE.
Confirmation is required before the selection is stored.
CONFIRM the selection.
This stores the current Service and its associated parameters as a pre-set in the selected location. This adds the
Service to the list displayed on page 1.
to store the current Service as a pre-set.
Quick Reference Guide
Page G-3