Initializing Settings (To Factory Defaults) - Hioki Memory HiLogger LR8401-20 Instruction Manual

Initializing Settings (to factory defaults)

Certain settings in all input units (or a selected input unit) can be reset to their factory
default state.
1
Select which screen you
want to initialize, from the
[Range], [Conv/Calc],
& Alm] screens.
2
Select a unit.
3
Select [Batch
Apply
The selected items are displayed.
4
Select the desired action.
The actions that can be selected
depend on the display screen
(see below).
Apply
[Range] Screen
• [Initialize all the range settings of all units shown on screen.]
Resets the range screen settings of all input units.
• [Initialize all the settings of this unit shown on screen.]
Resets the range screen settings of the selected input unit.
[Conv/Calc] Screen
• [Initialize all the scaling settings of all units.]
Resets the scaling settings of all input units.
• [Initialize all the waveform calculation settings of all units.]
Resets the waveform calculation settings of all input units.
• [Initialize all the settings of this unit shown on screen.]
Resets the conversion/calculation settings of the selected input unit.
[Trig & Alm] Screen
• [Initialize all the trigger/alarm settings of all units on screen.]
Resets the screen settings of all input units.
[Trig & Alm]
• [Initialize all the settings of this unit shown on screen.]
Resets the screen settings of the selected input unit.
[Trig & Alm]
3.9 Viewing and Editing with the All-Channel Settings List
[Trig
Proc].
79
3
3