Starting And Stopping Measurement - Hioki Memory HiLogger LR8401-20 Instruction Manual

Starting and Stopping Measurement

Start measuring (acquiring measurement data) as follows.
When saving is enabled, data is recorded to the specified removable storage (CF card or
USB flash drive) as it is being recorded to internal memory.
Start Measurement
Press START.
(The green LED lights.)
Finish Measurement
To automatically save measurement data, confirm the following before
starting:
• Auto saving is properly set (p. 127)
• The removable storage is properly inserted (p. 47)
• There is sufficient free space on the removable storage (p. A12)
Important
If [Start/Stop message]
Start confirmation message appears. Select
surement.
When restarting measurement after stopping, data in the
HiLogger's internal memory is overwritten. Be sure to save im-
portant data to removable storage before restarting measure-
ment.
When [Repeat] (record multiple instances of the specified
recording length) or
Pressing STOP stops measuring.
When [Repeat] and
Measuring stops after the specified recording length.
(If [Start/Stop message]
Stop confirmation message appears when you press
measurement. Pressing
mation message. Select
For details about repeating and continuous recording:
"Recording Time (Record time)"(p .53), "Repeat Recording
See:
(Repeat)"(p .53)
1.4 Basic Operation
is enabled on the System screen, the
[Yes]
[Cont] (record continuously) is enabled:
[Cont] are disabled (Off):
is enabled on the System screen, the
STOP during recording displays a confir-
[Yes] to stop measuring.)
25
1
3
to start mea-
STOP during