To Save A Setting Configuration - Hioki Memory HiLogger LR8401-20 Instruction Manual

To Save a Setting Configuration

Setting configurations can be saved as data files and later reloaded into the
HiLogger when you need to make more measurements with the same settings.
Up to ten setting configurations can be saved to internal memory, and more
can be stored on the removal storage device.
1
Select the [Setting]
2
Select [Save Set]
Apply
The Save dialog appears.
3
Select whether to save to
HiLogger memory, CF
card, or USB flash drive.
Apply
4
(When [Memory] is selected)
Select [Save]
figuration instance (No.)
to save.
Enter a comment as needed
(p. 73).
Apply
(When [CF Card], or
selected)
Setting configuration files are automat-
ically named CONFnnnn.SET in a fold-
er named [HIOKI_LR8400]-[CONFIG]
(p. 123).
Screen.
for the con-
Comments entered on the
are displayed here.
[USB memory] is
See:
[Comment]
To reload a setting configuration (p. 134)
133
6.2 Saving Data
3
6
screen