Hioki Memory HiLogger LR8401-20 Instruction Manual page 169

3
Configure Auto Save.
Select [[Calc(post
When [Waveform(realtime)]
not available.
4
Select a split-calculation (timing) method.
∗
Setting options: (
∗
Save only the last calculation results.
Off
On Save calculation results at a fixed interval. Set the calculation interval
equal to the [Length].
Ref Time Save calculation results at a fixed interval. Set the calculation time to the
[Split time]
5
Start measuring.
6
Select [Wave+Calc]
Numerical calculation results are displayed.
The results of
the selected
calculation (no.)
are displayed.
8.1 Calculate Average, Maximum, Minimum, and Etc.
meas.)], [Waveform +
or [CSV(realtime)]
: default setting)
and [Split Length].
display on the Wave/Numerical screen.
4
When set to On.
4
When set to Ref
Time.
Calc], or [CSV + Calc].
is selected, the settings in step 4 are
6
The results of the select-
ed input unit are dis-
played. Press
switch the display to an-
other input unit.
Select whether to display
calculations from the start of
measurement (normal), or
the latest calculations after
each interval (split value).
When split calculation is dis-
abled, the split value is dis-
played as "- - -".
157
3
UNIT to
3
8