About Communications Commands; Configuring Communications Command Operation - Hioki Memory HiLogger LR8401-20 Instruction Manual

10.8 About Communications Commands

Communications commands can be used to control the HiLogger remotely by con-
necting it to a PC with a USB or Ethernet cable.
This description applies only to HiLogger settings, and does not describe the com-
munications commands themselves. For details about the communications com-
mands, see the supplied Logger Utility CD. Communications command
descriptions are provided in HTML format.
These can be viewed by the following procedure.
1
Insert the supplied CD in the PC's CD-ROM drive.
2
Click index.htm in the LR8400 folder.
See "10.1 USB Settings and Connections" (p. 168) for the USB settings and connection
procedures.
See "10.2 LAN Settings and Connections (Before connecting to the network)" (p. 180) for
the LAN settings and connection procedures.

Configuring Communications Command Operation

1
Select the [Delimiter].
Set as needed for command communi-
cations control.
Setting options: (
∗
LF, CR+LF
2
Enable/disable the [Header].
Enable or disable command response
headers.
Setting options: (
On Attach headers.
∗
Do not attach headers.
Off
∗
: default setting)
∗
: default setting)
10.8 About Communications Commands
Key Setting Procedure (p. 168)
See:
225
3
1
10
2