Humidity Measurement Settings - Hioki Memory HiLogger LR8401-20 Instruction Manual

Humidity Measurement Settings

Enable this channel setting for humidity measurement with the optional Z2000 Humidity
Sensor. Make these settings on the
"Key Setting Procedure" (p .55)
See:
1
Select the input unit
(1-1 to 4-15), and check the box to enable the
channel.
2
Select [Humid].
When a measured value far exceeds the range limit (range label)
"OVER" or "-OVER" is displayed in place of numerical/cursor values, and the following values
are applied to calculations and data storage.
Input type Input range
Humidity 100%RH
[CH] screen.
(UNIT1 to 4) and channel
+OVER value -OVER value
3276.7 -3276.8
3.3 Input Channel Settings
1
: On
: Off
2 *
* The range is fixed at
[100%
61
3
3
f.s.].