Starting And Stopping Measurement - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

1.10 Starting and Stopping Measurement

Press the
[System]
When the
window will be displayed. Press the
Starting measurement after stopping it will cause the measurement data in the instrument's internal
buffer memory to be deleted. Save important data on an SD Memory Card or USB Drive before
starting measurement again.
Press the
[System]
When the
window will be displayed. Press the
• Measurement can also be stopped automatically at the set recording time.
See "1.2 Setting Measurement Conditions" (p. 1 0).
• You can prevent misoperation of the
See "7.1 Configuring Settings" (p. 1 64).
• You can start recording operation when specific conditions occur. This functionality is
convenient when you wish to monitor conditions for anomalies.
See "2 Trigger Function" (p. 8 1).
Measurement operation
START
Press the
Measurement
Recording time
Time specified
(STOP key not pressed)
Time specified
(If the STOP key
is pressed while
measurement is in
progress)
Continuous recording
Unit Measure
START key to start measurement.
[Operation error prevention]
>
ENTER
key while
STOP key to stop measurement.
[Operation error prevention]
>
ENTER key while
START
STOP
key. Press the
Set recording time
Repeat recording: OFF
Recording time
Measurement
Measurement Measurement
start stop
Recording time
Measurement
Measurement Measurement
start stop
Measurement
Measurement Measurement
start stop
Channel Trigger

Starting and Stopping Measurement

setting is [ON], an operation confirmation
[Yes]
is selected to start measurement.
setting is [ON], an operation confirmation
[Yes] is selected to stop measurement.
and STOP keys.
key.
Downtime
Repeat recording: ON
Recording time
Measurement
Measurement start
Downtime
Repeats processes until measurement stop.
Recording time
Measurement
Measurement start
Downtime
(Same as when repeat recording is OFF)
Alarm Calculation System
1
Measurement
stop
Measurement stop
59