1. Remove the spark plug leads. Twist the rubber boots slightly
and pull off.
2. Remove the spark plugs to inspect. Replace spark plug if
electrode is worn or the insulator is rough, cracked, broken,
blistered, or fouled.
3. Set the spark plug gap to specification.
Spark Plug
Spark plug gap
4. Before installing spark plugs, clean off any dirt on the spark
plug seats. Install plugs finger‑tight, and then tighten 1/4 turn
or torque to specifications.
Description
Spark plug
Compressor Air Intake Filter
The filter should be changed every 100 hours of operation, or once
a season.
MAINTENANCE
26899
26946
0.80 mm (0.031 in.)
Nm
27
68
26947
lb. in.
lb. ft.
20