Front Cable Clamp Assembly - Mercury 225 HP Installation Manual

Front Cable Clamp Assembly

IMPORTANT: Sufficient slack must exist in engine wiring harness, battery cables,
and fuel hose routed between cable clamp and engine attachment point, to relieve
stress.
1. Bundle the fuel line, battery cables and wiring together and wrap with the piece of foam
(provided) as shown. Secure the wiring, battery cables, fuel line and foam together with
sta-straps.
2. Push the flap (a) down over the top of the shift and throttle cable.
3. Lay the wrapped foam over the top of flap.
a
a -
b -
c -
d -
b
Shift and throttle cables
Flap - Position over the shift and throttle cables
Foam
Sta-Straps
225 (4-STROKE) INSTALLATION MANUAL
c
d
Page 7 of 16