4. Fasten outboard with provided mounting hardware.
Front Clamp Assembly
Removal
Remove two screws with retainer and open the front clamp.
Installation
IMPORTANT: Sufficient slack must exist in engine wiring harness battery cables, fuel
hose, and oil hoses between clamp and engine attachment point, to relieve stress and
prevent hoses from being kinked or pinched.
90-10234050
e
d
a -
Flat washer (4)
b -
1/2 in. diameter bolt (4)
c -
Shank of bolt
a
b
a -
Screws (2)
b -
Retainer
a
b
c
3729
d -
Locknut (4)
e -
Flat washer (4)
a
c
3765
c -
Clamp
200/225 OPTIMAX DTS
Page 9 / 42