Drive Belt And Cover Problems - Segway SGW570F-A3 Manual

177
180
180
181
181
182
183
183
185
With all the challenges you cna encounter off-road,there's
chance that sometime something may go wrong. This
section gives practical advice to help you deal with a wide
range of problems. Take time to read this section before you
ride.

Drive belt and cover problems

Possible Cause
Driving the ATV onto
a pickup or tall trailer
in high range
Starting out going up
a steep incline
Driving at low RPM
or low ground
speed
(at approximately
5-10 km/h)
Insufficient warm-
up of ATVs exposed
to low ambient
temperatures
TROUBLESHOOTING
Solution
Shift transmission to low range
during loading of the ATV to
prevent belt burning
When starting out on an incline,
use low range or dismount the
ATV (after first applying the park
brake) and perform the K-turn as
described on page 71
Drive at a higher speed or use
low range more frequently.
The use of low range is highly
recommended for cooler CVT
operating temperatures and
longer component life
Warm the engine before driving,
the belt will become more flexible
and prevent belt burning
177