Troubleshooting; Drive Belt And Cover Problems - Segway SNARLER AT6 S Owner's Manual

With all the challenges you can encounter off-road, there's chance
that sometime something may go wrong. This section gives
practical advice to help you deal with a wide range of problems.
Take time to read this section before you ride.

Drive belt and cover problems

Possible Cause
Driving the ATV onto a
pickup or tall trailer in
high range
Starting out going up a
steep incline
Driving at low RPM or
low ground speed
3-6 MPH
(at approx.
(5-10 km/h))
Insufficient warm-up
of ATVs exposed to low
ambient temperatures
Slow and easy clutch
engagement
Towing/pushing at low
RPM/low ground speed
U t i l i ty u s e /p l ow i n g
snow, dirt, etc

TROUBLESHOOTING

TROUBLESHOOTING

Solution
Shift transmission to low range
during loading of the ATV to prevent
belt burning.
When starting out on an incline, use low
range or dismount the ATV (after first
applying the park brake) and perform
the K-turn as described on page 77.
Drive at a higher speed or use low
range more frequently. The use of
low range is highly recommended for
cooler CVT operating temperatures
and longer component life.
Warm the engine before driving. The
belt will become more flexible and
prevent belt burning.
U s e t h e t h r o t t l e q u i c k l y a n d
effectively for efficient Engagement.
Use low range only.
Use low range only.
173