Honda CRF450R 2009 Service Manual page 74

FRAME/BODY PANELS/EXHAUST SYSTEM
Inslalithe muffler by aligning the tab of the muffler joint
band with the cut-out of the muffler.
Install the washers and muffler mounting bolts.
Tighten the muffler mounting bolls to the specified
torque.
TORQUE : 26 N' m (2.7 kgf' m , 191bHt)
Tighten the muffler joint band bolt to the specified
torque.
TORQUE:21 N·m (2.1 kgf-m, 15Ibf·ft)
Install the right side cover (page 3-3).
MUFFLER REMOVAUINSTALLATION
(After '12)
'09 shown:
BOLT
MUFFLER
CUT-OUT
JOINT BAND BOLT
Remove the side covers (page 3-4).
,~~~~~'~;r~11
Loosen the right muffler joint band bolt.
Remove the right muffler mounting bolt, washer, right
muffler, gasket and muffler joint band.
Remove the screws and mud guard.
3-12
TAB