Ecm - Honda CRF450R 2009 Service Manual

ECM
INSTALLATION
Install a new O-ring onto the
Eel
sensor.
Install and lighten the
Eel
sensor to the specified
torque.
TORQUE : 12 N' m (1.2 kgf-m , 9 lbHt)
Connect the Eel sensor 2P
(Black)
connector.
Inslallthe exhaust system (page 3-11).
Fill and bleed the cooling system (page 7-8).
REMOVAL/INSTALLATION ('09 - '12)
Hang the fuel lank to the left side of the frame
(page
4-6).
Disconnect the ECM 33P (Black) connector.
Remove the ECM from the ECM stay,
Installation is in the reverse order of removal.
FUEL SYSTEM (PGM-FI)
6·73