Honda CRF450R 2009 Service Manual page 402

FRONT WHEELISUSPENSIONfSTEERING
Return the rebound and compression damping
adjusters to the original positions as noted during
removal.
INSTALLATION
Install the fori< leg, and lighten the bottom bridge pinch
bolts to the specified torque.
TORQUE: 20 N'm (2.0 kgf'm, 151bHt)
'09 shown:
COMPRESSION ADJUSTER
REBOUND
Do
not
use
8
When the fork leg is disassembled, lighten the fork
~~: : : : : ~ ~:!~~~~~~~~~~~~~
crescent or
damper to the specified torque using the special tool. '09 shown:
adjustable wrench
/0 tight9ll the
fork
TOOL:
damper;
it
cookJ be
Lock nut wrench, 49 mm 070MA-MEN0100 or
070MA-MENA100
(U.S.A. only)
damaged.
Refer to torque
wrench reading
information in
·SERVICE
INFORMA nON"
(page 14-5).
'13 - ' 14:
TORQUE:
Actual : 30 N' m (3.1 kgf' m, 22 IbHt)
Indicated : 27 N' m (2.8 kgf-m, 20 IbHt)
When the fork cap was removed from the damper,
tighten the fork cap to the specified torque while holding
the damper with the special
tool.
Do
not use a
TOOL:
crescent or
Lock nut wrench,
49
mm
adjustable
wr&nCh
10 hokf the fori<.
damper;
;f
rould
be
070MA·MEN0100 or
070MA·MENA100
(U.S.A. only)
demag&d. TORQUE : 28 N·m (2.9 kgf' m , 211bHt)
Inslalilhe handlebar (page 14-61).
14-42
LOCK NUT WRENCH