Honda CRF450R 2009 Service Manual page 464

REAR WHEEUSUSPENSION
15-24
Remove the washers, valve stopper, rebound valves
and piston from the damper
rod.
Use a piece of mechanics wire to keep the removed
valves in the correct order.
Keep dust and abrasive away from all damper rod
parts.
Thoroughly clean the valves in solvent and blow
them dry with compressed air.
Be careful not to gel solvent on the O-rings and
piston ring.
The valve arrangement and number of valves shown
is typical and
may
not represent this model exactly.
Remove the compression valves and valve stopper.
Chase the threads with a die and clean with shock oil.
Wrap the threads of the damper rod with tape.
Remove the rod guide case assembly from the damper
'cd.
Remove the O-ring from the
rod guide case.
PISTON VALVE STOPPER
VALVES WASHERS
VALVE STOPPER COMPRESSION VALVES
~
ROD TAPE
/
Remove the end plate, rubber stopper and rubber seat
~' O ~ 9 ~ ' ~ h ~ O ~ W ~ " ~ ' ~~~~~==R= U = B = B = E = R = S = T ~ O ~ P ~ P ~ E ~ R ~
-~,~~~
/
RUBBER SEAT END PLATE