REAR WHEEUSUSPENSION
ROD GUIDE CASE INSPECTION
Inspect Ihe rebound rubber, oil seal lips and
dust
seal
r - - - - - - - - - - - - - - - - - - - ,
tips for wear or damage
,
and replace them wi th new
REBOUND RUBBER
METAL
ones
jf
necessary
.
•
When replace the rebound
rubber,
oil seal and dust
seal,
apply recommended shock oiL
Visually Inspect the rod guide case metal.
If the metal is worn so that the copper surface appears,
replace the rod guide case with a new one.
COMPRESSION/DAMPING ADJUSTER
INSPECTION
OIL SEAL
DUST SEAL
Inspect the compression damping adjuster (After
'14:
r - - - - - - - - - - - - - - - - - - - ,
damping adjuster) for
wear,
scratches or
damage.
'09 shown
:
COMPRESSION ADJUSTER
DAMPER ROD INSPECTION
Inspect the damper rod sliding surface for damage or
r - : - - - - - - - - - - - - -
--
- ,
distortion.
'09
shown:
8 mm (0.3
in)
8 mm (O.3
in)
Replace
it
if
necessary.
SLIDI NG SURFACE
15-25