Honda CRF450R 2009 Service Manual page 391

FRONT WHEEUSUSPENSION/STEERING
'1 1-
' 14-
Inslall the collar. back-up ring, guide bushing and slider
bushing.
NOTE:
Be careful nollo damage the slider bushing coating.
Do not open the slider bushing more than
necessary.
Remove the burrs from the bushing mating surface.
being careful oot to peel off the coaling.
'1 1- '14:
BACK-UP RING GUIDE BUSHING
Coat the guide bushing and slider bushing with
~~~~====~:":':"~~~~==::::~
'09, '10 shown:
recommended fork oil (page 14-33). and install the fon.:
slider into the outer tube.
Drive in the guide bushing together with the back-up
;::============== O=Il = S= E A = L ~
ring (' 11 - ' 14: back-up ring and collar) into the outer
tube using the special tool.
Drive the oil seal into the outer lube using the special
tool.
TOOL:
Fork seal driver, 48.2 x 58 mm 070MO·MEN0100 or
070MO-MENA100
(U.S.A . only)
FORK SEAL DRIVER
'09, '10:
BACK-UP RING
GUIDE BUSHING
'11- '14'
COLLAR
BACK-UP \
I
RING
GUIDE BUSHING
14-31