Honda CRF450R 2009 Service Manual page 72

FRAME/BODY PANELS/EXHAUST SYSTEM
3-10
Align the air cleaner connecting boot band hole with the
tab of the air cleaner connecting boot.
Tighten the air cleaner connecting boot
(screw) to the specified width as shown.
band bolt
Inslallthe following:
- Muffler (page 3-11)
Side covers (page 3-3)
- Seat (page 3-3)
REMOVALIINSTALLA nON
(AFTER'12)
Remove the following:
- Seat (page 3-3)
- Side covers (page 3-4)
- Muffler (page 3-12)
Remove the air cleaner housing mounting bolls.
Unhook the fuel lank band from the fuel lank
bracket.
band
Remove the mounting bolts and pull the rear fender
backward (page 3-7).
Release the air cleaner housing holes from the sub-
frame bosses.
4.5 ± 1.5
mm
(O.18±O.06in)
FUEL TANK BAND
•
Align