Honda CRF450R 2009 Service Manual page 306

CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
11-18
Install the clutch pressure plate.
Inslalilhe springs and clutch spring bolts.
Tighten Ihe clutch spring bolls to Ihe specified torque in
a crisscross pattern in two or three steps.
TORQUE: 12 N-m (1 .2 kgf'm , 9lbHt)
Check Ihat the clutch cover O-ring is in good condition,
replace it if necessary.
Apply engine oil to the D·ring, and install it to the clutch
cover.
Instalilhe clutch cover.
Install and tighten the clu tch cover bolls to the specified
torque in a crisscross pattern in two or three steps.
TORQUE: 10 N'm (1 .0 kgf'm, 7lbHt)
Install the brake pedal pivot bolt (page 16-30).
Adjust the clutch lever free play (page 4·30).
FiU the transmission with Ihe recommended oil
(page 4-19).
Start the engine and check for oil leaks.