Rear Brake Caliper Removal; Rear Brake Caliper Disassembly - Honda CBR954RR 2002 Service Manual

Push the brake hose eyelet to the stopper on the
caliper, then tighten the oil bolt to the specified
torque.
TORQUE:
Fill and bleed the front brake hydraulic system (page
REAR BRAKE CALIPER
REMOVAL
Drain the rear brake hydraulic system (page 15-4).
Remove the oil bolt, sealing washers and brake hose
Avoid spiiiing fiwd
eyelet joint.
on painted, piastic,
or rubber parts
these parts when-
ever the system
is serviced
Remove the caliper bracket bolts and the brake pads
(page 15-10).
Pivot the caliper up and remove it.
DISASSEMBLY
Remove the pad spring, collar and boot f r o m the
caliper body.
34 (3.5
HYDRAULIC BRAKE
COLLAR BOOT
PAD SPRING