Using The Keypad - Stratasys Fortus 360mc User Manual

Using the Keypad

The Operator Control Panel has the following keypad buttons
Button
MENU
Up Arrow
Down Arrow
ENTER
ESCAPE
LIGHT
PAUSE
HELP
Dot <.>
DEL
1 - 9
1
2, 4, 6, 8
3, 9
9
Figure 4-2: Keypad Buttons
Description
Takes you up one level in the menu directory, unless stated
otherwise. It is also used to take you out of the Help system.
Moves the cursor up one line in the display each time it is
pressed.
Moves the cursor down one line in the display each time it
is pressed.
Activates the selection indicated on the display.
Takes you back to the Main Menu, unless stated otherwise.
Toggles the Oven Light ON and OFF.
Pauses the current build job. To Pause, hold button in for 2-
3 seconds. Use the Resume Build command to resume
build.
Displays Help information for the current menu.
Shows details of the current job selected in the queue.
Available only when job queue is being viewed. (When in
detail view, use arrow keys to display other jobs in queue.)
Toggles between all sample jobs and only jobs for the cur-
rent system configuration.
Deletes entered characters, jobs in the job queue, and
jobs in the sample queue.
In addition to entering the numbers 1 through 9, the num-
ber keys perform the following actions:
Moves a job to the top of the queue. Available only when
job queue is being viewed.
Move the axes:<4> (X left), <6> (X right)
<2> (Y back), <8> (Y front).
Move the Z stage: <3> (Z up), <9> (Z down).
Copies the selected job to the sample queue. Available
only when job queue is being viewed.
4-2
(Figure 4-2):