Information Available During A Build; Pausing Or Aborting A Job - Stratasys Fortus 360mc User Manual

Information Available During a Build

The following information is displayed while building a job:
• 1st line: The name of the build job.
• 2nd line: The elapsed time and total estimated build time -displayed in hours
and minutes.
• 3rd line: The material type and estimated total amount of material for the
build. The build mode is also displayed.
• 4th line: The current height of the job and final Z height of the job.
Note: Press ENTER to go to the System Status screen (see
"System Status" on page

Pausing or Aborting a Job

1.
During a part build, the system can be paused:
A.
Note: If an automatic pause occurs, press the HELP key to
view the cause.
B.
2.
When the system is directed to pause:
A.
B.
C.
D.
3.
From Pause mode, you can make the following selections:
* Job: motor housing (Building)
* Build Time: 0:01 hr of 0:02 hr
* PC 0.1 in3 PC_S 0.1
> Modeler Status..
Automatically (canister runs out of material, failure detected, etc.)
Manually - press and hold the PAUSE key on the operator panel for 2 - 3
seconds.
The current tool path is completed.
The Z stage is lowered slightly.
The head is parked.
The user display will change to indicate the paused condition.
* Job: clip4
>Resume Build <E>
Modeler Status..
Operator Control..
Mode:Normal
0.010 of 0.950 in
4-32).
(Paused)
| Abort Job..
| Auto Cool:
4-9
OFF