Chapter 2: Setup And Installation; General Information; Prepare Your Facility For Installation; Identifying Your System - Stratasys Fortus 360mc User Manual

Chapter 2: Setup and
Installation
This chapter describes basic setup and installation of the Fortus
360mc/400mc system.

General Information

Prepare Your Facility for Installation

Follow the 360mc/400mc Site Preparation Guide to ensure that your facility is
effectively and safely prepared for system installation.

Identifying Your System

Use the following two tags to identify your system:
• Serial Number Tag - Refer to this number when requesting service.
• Model Tag - The model number, the power requirements, and the company's
address and phone number are given on the tag. All patent numbers
associated with the system are listed on the lower left part of the tag.
Both tags are located on the back side of the system near the bottom. They are
typically placed near the system's power connection. Use the information on
these tags when identifying your system.
Figure 2-1: ID Tag Location
Serial Tag
Model Tag
2-1
(Figure 2-1)