Canister Bay; Accessing The Bays; Canister Bay Components - Stratasys Fortus 360mc User Manual

• Lead Screws, Guide Rods, & Bearings - located on both sides of the oven.
They provide the structure for moving the platen up and down.
• Z Stage Servo Motor - mounted beneath the oven. It provides the power to
move the platen up and down.
• Drive Belt - located beneath the oven and synchronizes the platen movement
on both sides of the oven.

Canister Bay

Accessing the Bays

The canister bays are accessed by opening the canister bay door on the front of
the system
interlock system and, therefore, can be opened during system operation.

Canister Bay Components

1.
The Canister Bay
A.
B.
(Figure 3-13). The canister bay door is not a part of the door safety
Figure 3-13: Canister Bay Components
(Shown with 4 operable bays - Large Oven Option)
Canister
LEDs
Model Material
Canister
The standard 360mc/400mc system has two operating material bays - 1
model and 1 support.
• An optional four bay upgrade (large oven option) is available for the
system and can be added before or after system installation.
For 2 bay systems, the middle two bays are operating bays.
Vacuum
Gauge
Canister Drive
Levers
Air Pressure
Gauge
Purge Waste
Bucket
Support Material
Canister
3-16