2564MR Barcode Scanner
2.6 USB HID VIA BT CRADLE
For USB HID, use the USB cable to connect the scanner via cradle to the USB port of PC and
connect the power supply cord. Run any text editor on your computer, and the scanned data
will be transmitted to the computer.
Warning:
When the cradle is solely on USB power, the provided current may be
insufficient for it to function normally. You must connect the power supply
cord.
HID Settings
Keyboard Type
Digits Layout
Capital Lock Type
Capital Lock State
Alphabets Transmission
Digits Transmission
Kanji Transmission
Inter-Character Delay
Inter-Function Delay
86
User Guide
Defaults
PCAT (US)
Normal
Normal
Off
Case-sensitive
Alphanumeric keypad
Disable
0 (ms)
0 (ms)
Enter Setup