Table of Contents
Advertisement
2564MR Barcode Scanner
11.
Now the target scanner will be listed as shown below.
You can have up to seven scanners connected to one computer at the same time.
Select and Remove
Note: When any changes are made to authentication and PIN code on the scanner side, or
you want to change to use BT HID, it is suggested that you remove the scanner from
the paired device list (called unpairing) and go through the whole process to
re-establish the connection.
12.
Run the desired application on your computer, such as HyperTerminal.exe if using BT SPP or
Notepad.exe if using BT HID.
The status of the scanner listed on the device list will be updated to "Connected", indicating the
WPAN connection is established successfully via the outgoing COM port if using BT SPP.
Note: Even though the scanner is connected to the host with authentication disabled (= no
PIN code required), the host may still request a PIN code while the application is
opening COM port. Dynamic input of PIN code is supported so that you may input a
matching PIN code on the scanner. Refer to
PIN.
112
User Guide
Disable Authentication or Use Random
Enter Setup
Advertisement
Table of Contents
