Note: GS1-128 barcodes can be decoded only when this setting is enabled.
4.11.1 TRANSMIT CODE ID
Decide whether to include the Code ID ("
4.11.2 FIELD SEPARATOR (GS CHARACTER)
Decide whether to apply a field separator (to convert the
readable character).
1) Read the barcode above to enable field separator.
2) Read the
"Hexadecimal
3) Read the "Validate" barcode to complete this setting.
Note: GS1-128 barcodes start with the
from other uses of Code 128.
barcodes.
") in the data being transmitted.
]C1
Value" barcode on page 264 for the desired character string.
FNC1
is also used to separate data fields in the GS1-128
FNC1
Chapter 4
Changing Symbology Settings
*Enable
Disable
Transmit GS1-128
Code ID
*Do Not Transmit
control character to human
FNC1
Enable Field
Separator...
control character to distinguish themselves
Update
133