CipherLab 2564MR User Manual page 178

2564MR Barcode Scanner
FIELD SEPARATOR
Decide whether to apply a field separator (to convert the GS control character to human
readable character). The field separator is automatically added to the data when GS1
formatting is enabled.
1) Read the barcode above to specify field separator.
2) Read the "Hexadecimal
3) Read the "Validate" barcode to complete this setting.
APPLICATION ID MARK
You may want to add an application ID mark (1 character long) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the GS1
data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
168
User Guide
Value" barcode on page 264 for the desired character string.
Value" barcode on page 264 for the desired character. Read '00'
Enable
*Disable
Specify Field
Separator...
AIMark1
AIMark2
Enter Setup