Field Adjustment; Total Number Of Fields - CipherLab 2564MR User Manual

6.4.2 FIELD ADJUSTMENT

You may apply equal length to all fields, if necessary. If data is found longer than specified,
it will be truncated automatically. When data is found shorter, it will add "Space" (0x20) to
field.
1) Read the barcode above to adjust field by length.
2) Read the "Decimal
3) Read the "Validate" barcode on the same page to complete this setting.

6.4.3 TOTAL NUMBER OF FIELDS

Data can be divided into at most 6 fields; each of them is numbered from F1 to F6
accordingly. However, only F1~F5 can be configured.
The total number of fields must be specified correctly. If three fields are configured for

the editing format, the data characters after F3 will be assigned to F4 automatically. This
feature is quite useful especially when data of variable lengths is processed by editing
formats.
Value" barcode on page 263 for the desired field length.
Chapter 6 Applying Formats for Data Editing
*No adjustment
Set length to adjust
fields... (*0)
*One Field
Two Fields
Three Fields
Four Fields
Five Fields
Update
227